, ,
• •

Dataset Report

Unique identifier:	BGDGN199.0.0
Title:	B-GOOD Genotyping pooled SMR
Long title:	Dataset from the B-GOOD project, containing results for tier 1 and tier 2 from 2021 on the genotyping on pooled worker bees.
Status:	Quality Validated
Current Version:	v. 1.0
Published:	2025-03-17
Reviewed by:	Rubinigg Michael as Data scientist
Citation proposal:	B-GOOD Bee Health Data Portal 2025 Report of dataset B-GOOD Genotyping pooled SMR, v. 1.0 [BGDGN199.0.0]. EU Pollinator Hub. [2026-02-24] app.pollinatorhub.eu

Compliance with FAIR* principles
Findable	Accessible	Interoperable	Reusable
See https://www.go-fair.org/fair-principles for more information about FAIR principles

Data Quality

Good

This document is intended for use by collaborators of the EU Pollinator Hub and may be passed on with the express permission of the leader of the consortium and for the purpose determined by the leader of the consortium.

Table of content

Document history
1. Release
2. Revision
Abbreviations
Executive summary
Introduction
Material and methods
Data description
1. Dataset
2. Tables
  1. All
  2. Fully genotypes
  3. SNP1
  4. SNP2
  5. SNP3
  6. SNP4
  7. SNP5
  8. SNP6
  9. SNP7
  10. SNP8
References
Annex 1: Table column reports

Document history

Release

Version v. 1.0 released on 2025-03-17. Reviewed by Rubinigg Michael.

Revision

Table 1. List of revisions made to the document. Identifier of revision (No); date of revision (Date); description of revision (Description); reason for revision (Reason).

No	Date	Description	Reason
1	2025-03-17 00:03:00	Initial release.	n/a

Abbreviations

CSV

Comma-Separated Values

European Union

EUPH

EU Pollinator Hub

SMR

Suppressed Mite Reproduction

SNP

Single Nucleotide Polymorphism

UGENT

Universiteit Gent (Ghent University)

Executive summary

Data overview:

The data was published by De Smet L on the B-GOOD Bee Health Data Portal as part of the B-GOOD project (grant agreement 817622), funded under the EU Horizon 2020 Research and Innovation Programme. It contains data on genotyping of pooled worker bees with SMR SNP's, as part of tier 1 and toer 2 studies performed in 2021.

Data value:

The objectives of the B-GOOD project were: (1) Facilitate decision making for beekeepers and other stakeholders by establishing ready-to-use tools for operationalising the HSI; (2) Test, standardise and validate methods for measuring and reporting selected indicators affecting bee health; (3) Explore the various socio-economic and ecological factors beyond bee health; (4) Foster an EU community to collect and share knowledge related to honey bees and their environment; (5) Engender a lasting learning and innovation system (LIS); (6) Minimise the impact of biotic and abiotic stressors.

Data description:

n/a

Data application:

Currently, the data integrated from the B-GOOD Bee Health Data Portal contains major issues and does not comply with the FAIR Guiding Principles for scientific data management and stewardship applied on the EU Pollinator Hub. More descriptive information about the context, quality and condition, or characteristics of the data (e.g. protocols, measurement devices used, units of the captured data, or any other details about the study) must be provided. More metadata in the form of accurate and relevant attributes (*e.g. *metadata that describes the scope of the data has been described, any particularities or limitations about the data that other users should be aware of, specification of the date of generation/collection of the data, the lab conditions, who prepared the data, the parameter settings, the name and version of the software used, specification of whether it is raw or processed data, explanation of all variable names are explained if they are not self-explanatory) must be provided. The dataset requires major revision by the data provider.

Unresolved issues:

n/a

Introduction

n/a

Material and methods

Data acquisition

All raw data files were downloaded from the B-GOOD Bee Health Data Portal on 2024-09-26 18:16:33.

List of raw data obtained from the data provider.

File results-genotyping-pooled-workers-b-good.xlsx accessed on 2024-09-26 18:16:33, provided by B-GOOD Bee Health Data Portal

Metadata was obtained from the dataset's web page.

Table 2. List of raw data and metadata files included in the dataset. Identifier of table row (No); name of the file (File); the type of the file (Type); file contains data (D); file contains metadata (M); date of upload of the file to the EU Pollinator Hub (Arrival); number of data points contained within the file (if applicable); uploaded file size.

No	File	Type	D	M	Arrival	Data points	File size
1	All_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:48	1,970	20.88 KiB
2	Fully genotyped_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:32	1,460	16.52 KiB
3	SNP1_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:01	990	10.37 KiB
4	SNP2_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:17	1,044	10.95 KiB
5	SNP3_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:29	966	10.28 KiB
6	SNP4_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:44	1,026	10.97 KiB
7	SNP5_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:39	1,080	11.37 KiB
8	SNP6_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:15	1,140	11.93 KiB
9	SNP7_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:32	1,074	10.69 KiB
10	SNP8_PREP_MR_241104.csv	CSV - Comma seperated values	Yes	No	2024-11-04 13:11:48	1,014	10.74 KiB

Data preparation

All files in the zip-archives were extracted using File Explorer (Microsoft Corporation, version 22H2).

File results-genotyping-pooled-workers-b-good.xlsx was procesed with MS Excel (Microsoft Corporation, version 2409). The worksheets were exported in CSV format (utf-8 encoding) and imported into Notepad++ (version 8.7) where missing values were substituted by {NULL} using regular expressions and decimal points were converted to a baseline dot using regular expression ((?<=\d),(?=\d) replaced with .).

Data was then exported to the respective preparatory files and uploaded to the EU Pollinator Hub according to SOP-017 (Dataset integration.

Data validation

No data validation was performed.

Data analysis

No data analysis was performed.

Data description

Dataset

Table 3. Summary of tables belonging to the dataset. Table row identifier (No); name of the table (Table); description of the table (Description).

No	Table	Description
1	All	Combined data for all SNPs.
2	Fully genotypes	Data from samples with all 8 SNPs genotyped.
3	SNP1	Data from SNP 1.
4	SNP2	Data from SNP 2.
5	SNP3	Data from SNP 3.
6	SNP4	Data from SNP 4.
7	SNP5	Data from SNP 5.
8	SNP6	Data from SNP 6.
9	SNP7	Data from SNP 7.
10	SNP8	Data from SNP 8.

Table 4. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
interactions.single.uid	BGDGN199.0.0
Title	B-GOOD Genotyping pooled SMR
Long title	Dataset from the B-GOOD project, containing results for tier 1 and tier 2 from 2021 on the genotyping on pooled worker bees.
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/BGDGN199.0.0
interactions.single.section-details.licence	CC BY-NC-ND 4.0
DOI	n/a
Created	2024-11-04
Published	2025-03-17
Contact	n/a
Keywords	Apis mellifera, SMR, SNP, Suppressed Mite Reproduction, genotyping, honey bee
Data collection years	2021
Regions, the data was collected in	n/a
Abstract	Dataset containing data on genotyping of pooled worker bees with SMR SNP, as part of tier 1 and tier 2 studies performed in 2021. It was published by De Smet L (UGENT) on the B-GOOD Bee Health Data Portal as part of the B-GOOD project (grant agreement 817622), funded under the EU Horizon 2020 Research and Innovation Programme.

Table 5. Standardised metadata of the data provider B-GOOD Bee Health Data Portal. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Name	B-GOOD Bee Health Data Portal
Url
Acronym	B-GOOD
IRI	https://app.pollinatorhub.eu/data-providers/b-good-bee-health-data-portal
Address	https://b-good-project.eu
Country	Belgium
Contact	b-good-project.eu
Description	Project funded by the EU Horizon 2020 Research and Innovation Programme under grant agreement No 817622. Project website: https://b-good-project.eu

Tables

All

Table 6. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.ALLAB486.0
Name	All
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.ALLAB486.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Combined data for all SNPs.

Combined data for all SNPs.

Metadata

n/a

Table 7. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT SNP1	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT SNP2	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT SNP3	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT_SNP4	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT_SNP5	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT_SNP6	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT SNP7	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT SNP8	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 8. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.6469717800	0	0	1	4.31985294	34.16149068	197	26 ( 13.2% )	63 ( 32.0% )	0 ( 0.0% )	88 ( 44.7% )
%WT SNP1	1 - 11	55.1405455900	0	33.86484901	57.05726243	76.63692376	100	197	32 ( 16.2% )	4 ( 2.0% )	0 ( 0.0% )	144 ( 73.1% )
%VT SNP2	1 - 11	40.0328517000	0	19.49761783	36.84932291	57.51056321	100	197	23 ( 11.7% )	16 ( 8.1% )	0 ( 0.0% )	155 ( 78.7% )
%WT SNP3	3 - 11	75.7145307200	4.482260858	68.10365258	78.70889394	87.39595038	100	197	36 ( 18.3% )	0 ( 0.0% )	0 ( 0.0% )	156 ( 79.2% )
%VT_SNP4	1 - 11	45.3540254400	0	31.49052492	44.82240363	59.7590263	92.7235043	197	26 ( 13.2% )	2 ( 1.0% )	0 ( 0.0% )	171 ( 86.8% )
%WT_SNP5	3 - 11	53.5836237000	1.054369516	30.26777446	49.67057544	76.83676998	100	197	17 ( 8.6% )	0 ( 0.0% )	0 ( 0.0% )	162 ( 82.2% )
%WT_SNP6	1 - 11	42.6447732800	0	14.96576802	42.79109136	59.90234804	100	197	8 ( 4.1% )	1 ( 0.5% )	0 ( 0.0% )	169 ( 85.8% )
%VT SNP7	1 - 11	14.6519691600	0	0	1.25096672	20.82125072	97.18110572	197	18 ( 9.1% )	78 ( 39.6% )	0 ( 0.0% )	103 ( 52.3% )
%WT SNP8	1 - 11	34.1425068200	0	20.02609275	35.22537038	45.51590307	100	197	28 ( 14.2% )	13 ( 6.6% )	0 ( 0.0% )	152 ( 77.2% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	197	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	197 ( 100.0% )

Quality measures

Table 9. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	86.80%	44.67%	0	4.081632653
%WT SNP1	83.76%	73.10%	n/a	60.10321397
%VT SNP2	88.32%	78.68%	n/a	98.55977463
%WT SNP3	81.73%	79.19%	n/a	87.04667184
%VT_SNP4	86.80%	86.80%	n/a	35.24010352
%WT_SNP5	91.37%	82.23%	100	31.24611541
%WT_SNP6	95.94%	85.79%	100	29.3200237
%VT SNP7	90.86%	52.28%	0	1.330577858
%WT SNP8	85.79%	77.16%	n/a	31.44958071
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Changes made to preparatory file

Column Sample was renamed to Sample_plate in order to assure that all columns containing the same information have the same name in the dataset.

Changes made to data

Missing values (214 occurrences) were replaced by {NULL}.

Unresolved issues

For column Varroa/100 bees is can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP1 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP2 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP3 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP4 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP5 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP6 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP7 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP8 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

Fully genotypes

Table 10. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.FLLYG487.0
Name	Fully genotypes
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.FLLYG487.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from samples with all 8 SNPs genotyped.

Data from samples with all 8 SNPs genotyped.

Metadata

n/a

Table 11. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT SNP1	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT SNP2	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT SNP3	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT_SNP4	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT_SNP5	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT_SNP6	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%VT SNP7	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
%WT SNP8	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 12. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.7052990900	0	0	0.92372881	4.39578005	34.16149068	146	14 ( 9.6% )	49 ( 33.6% )	0 ( 0.0% )	78 ( 53.4% )
%WT SNP1	1 - 11	53.7635266900	0	33.14642802	55.34611873	74.6144463	100	146	0 ( 0.0% )	3 ( 2.1% )	0 ( 0.0% )	128 ( 87.7% )
%VT SNP2	1 - 11	40.5817424300	0	20.44552144	38.65079622	57.51056321	100	146	0 ( 0.0% )	10 ( 6.8% )	0 ( 0.0% )	134 ( 91.8% )
%WT SNP3	3 - 11	75.334793520	22.85615556	68.0509934	76.2138877	85.89533093	100	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	142 ( 97.3% )
%VT_SNP4	9 - 11	45.9558419800	1.275329678	31.52023669	44.71511219	61.26489601	92.7235043	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	146 ( 100.0% )
%WT_SNP5	3 - 11	52.6448948000	4.823066094	30.34625344	49.67057544	73.83778961	100	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	138 ( 94.5% )
%WT_SNP6	1 - 11	46.8747232100	0	24.38664945	46.09592509	62.49655182	100	146	0 ( 0.0% )	1 ( 0.7% )	0 ( 0.0% )	132 ( 90.4% )
%VT SNP7	1 - 11	14.3369226900	0	0	1.29550921	21.51670169	79.38879443	146	0 ( 0.0% )	64 ( 43.8% )	0 ( 0.0% )	83 ( 56.8% )
%WT SNP8	1 - 11	36.7592623000	0	23.65645713	38.65343565	47.75480739	100	146	0 ( 0.0% )	9 ( 6.2% )	0 ( 0.0% )	132 ( 90.4% )
Sample_plate	16 - 25	n/a	AHBNGNKL_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	146 ( 100.0% )

Quality measures

Table 13. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	90.41%	53.42%	0	4.081632653
%WT SNP1	100.00%	87.67%	100	60.10321397
%VT SNP2	100.00%	91.78%	0	29.1413998
%WT SNP3	100.00%	97.26%	68.5731271	90.58432945
%VT_SNP4	100.00%	100.00%	29.56681541	29.56681541
%WT_SNP5	100.00%	94.52%	100	46.2503804
%WT_SNP6	100.00%	90.41%	100	57.51618532
%VT SNP7	100.00%	56.85%	0	64.806147
%WT SNP8	100.00%	90.41%	0	26.25212058
Sample_plate	100.00%	100.00%	AHBNGNKL_plaat 1	AHBNGNKL_plaat 1

Changes made to preparatory file

Column Sample was renamed to Sample_plate in order to assure that all columns containing the same information have the same name in the dataset.

Changes made to data

Missing values (14 occurrences) were replaced by {NULL}.

Unresolved issues

For column Varroa/100 bees it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP1 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP2 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP3 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP4 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP5 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP6 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %VT SNP7 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.
For column %WT SNP8 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP1

Table 14. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB488.0
Name	SNP1
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB488.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 1.

Data from SNP 1.

Metadata

n/a

Table 15. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT SNP1	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 16. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H11	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	86 ( 52.1% )
Sample	8 - 17	n/a	AHBNGNKL	n/a	n/a	n/a	ZZUPHAAK	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 97.6% )
Sample_plate	16 - 25	n/a	AHBNGNKL_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	165 ( 100.0% )
Varroa/100 bees	1 - 11	5.9743101400	0	0.125	2.5	6.59340659	46.90265487	165	45 ( 27.3% )	30 ( 18.2% )	0 ( 0.0% )	52 ( 31.5% )
%WT SNP1	1 - 11	55.1405455900	0	33.86484901	57.05726243	76.63692376	100	165	0 ( 0.0% )	4 ( 2.4% )	0 ( 0.0% )	143 ( 86.7% )

Quality measures

Table 17. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.82%	sciensano	plaat 2
Well	100.00%	52.12%	A06	F04
Sample	100.00%	97.58%	CGMGPPLU	AHBNGNKL
Sample_plate	100.00%	100.00%	AHBNGNKL_plaat 1	AHBNGNKL_plaat 1
Varroa/100 bees	72.73%	31.52%	n/a	4.411764706
%WT SNP1	100.00%	86.67%	100	60.10321397

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (45 occurrences) were replaced by {NULL}.

Unresolved issues

For column %WT SNP1 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP2

Table 18. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB489.0
Name	SNP2
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB489.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 2.

Data from SNP 2.

Metadata

n/a

Table 19. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample		String	Text [0.0.TEXTA315]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%VT SNP2	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 20. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 45.4% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	170 ( 97.7% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	174 ( 100.0% )
Varroa/100 bees	1 - 11	3.4145723300	0	0	0.74261011	4.02040816	34.16149068	174	16 ( 9.2% )	64 ( 36.8% )	0 ( 0.0% )	83 ( 47.7% )
%VT SNP2	1 - 11	40.0328517000	0	19.49761783	36.84932291	57.51056321	100	174	0 ( 0.0% )	16 ( 9.2% )	0 ( 0.0% )	154 ( 88.5% )

Quality measures

Table 21. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.72%	sciensano	plaat 2
Well	100.00%	45.40%	G08	F07
Sample	100.00%	97.70%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	90.80%	47.70%	0	4.081632653
%VT SNP2	100.00%	88.51%	0	98.55977463

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (16 occurrences) were replaced by {NULL}.

Unresolved issues

For column %VT SNP2 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP3

Table 22. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB490.0
Name	SNP3
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB490.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 3.

Data from SNP 3.

Metadata

n/a

Table 23. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT SNP3	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 24. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.9% )
Well	3 - 3	n/a	A02	n/a	n/a	n/a	H10	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	77 ( 47.8% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	157 ( 97.5% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 100.0% )
Varroa/100 bees	1 - 11	3.6945195800	0	0	0.7812508	4.32684622	34.16149068	161	15 ( 9.3% )	57 ( 35.4% )	0 ( 0.0% )	80 ( 49.7% )
%WT SNP3	3 - 11	75.7145307200	4.482260858	68.10365258	78.70889394	87.39595038	100	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	155 ( 96.3% )

Quality measures

Table 25. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.86%	sciensano	plaat 2
Well	100.00%	47.83%	G08	F07
Sample	100.00%	97.52%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	90.68%	49.69%	0	4.081632653
%WT SNP3	100.00%	96.27%	100	87.04667184

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (15 occurrences) were replaced by {NULL}.

Unresolved issues

For column %WT SNP3 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP4

Table 26. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB491.0
Name	SNP4
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB491.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 4.

Data from SNP 4.

Metadata

n/a

Table 27. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%VT_SNP4	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 28. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 46.2% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	168 ( 98.2% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	171 ( 100.0% )
Varroa/100 bees	1 - 11	3.4262976200	0	0	0.72628311	4.06122448	34.16149068	171	15 ( 8.8% )	64 ( 37.4% )	0 ( 0.0% )	83 ( 48.5% )
%VT_SNP4	1 - 11	45.3540254400	0	31.49052492	44.82240363	59.7590263	92.7235043	171	0 ( 0.0% )	2 ( 1.2% )	0 ( 0.0% )	170 ( 99.4% )

Quality measures

Table 29. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.75%	sciensano	plaat 2
Well	100.00%	46.20%	G08	F07
Sample	100.00%	98.25%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	91.23%	48.54%	0	4.081632653
%VT_SNP4	100.00%	99.42%	0	35.24010352

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (15 occurrences) were replaced by {NULL}.

Unresolved issues

For column %VT SNP4 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP5

Table 30. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB492.0
Name	SNP5
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB492.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 5.

Data from SNP 5.

Metadata

n/a

Table 31. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT_SNP5	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 32. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 43.9% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	176 ( 97.8% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	180 ( 100.0% )
Varroa/100 bees	1 - 11	3.4267982600	0	0	0.74261011	4.10289115	34.16149068	180	18 ( 10.0% )	65 ( 36.1% )	0 ( 0.0% )	85 ( 47.2% )
%WT_SNP5	3 - 11	53.5836237000	1.054369516	30.26777446	49.67057544	76.83676998	100	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 89.4% )
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )

Quality measures

Table 33. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	43.89%	G08	F07
Sample	100.00%	97.78%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	90.00%	47.22%	0	4.081632653
%WT_SNP5	100.00%	89.44%	100	31.24611541
Plaat	100.00%	1.67%	sciensano	plaat 2

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (18 occurrences) were replaced by {NULL}.

Unresolved issues

For column %WT SNP5 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP6

Table 34. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB493.0
Name	SNP6
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB493.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 6.

Data from SNP 6.

Metadata

n/a

Table 35. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT_SNP6	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 36. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.6% )
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 41.6% )
Sample	3 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	187 ( 98.4% )
Sample_plate	11 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	190 ( 100.0% )
Varroa/100 bees	1 - 11	3.4551826400	0	0	0.7812508	4.23315602	34.16149068	190	22 ( 11.6% )	65 ( 34.2% )	0 ( 0.0% )	88 ( 46.3% )
%WT_SNP6	1 - 11	42.4315565200	0	14.28250012	42.64903742	59.84230762	100	190	0 ( 0.0% )	1 ( 0.5% )	0 ( 0.0% )	169 ( 88.9% )

Quality measures

Table 37. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.58%	sciensano	plaat 2
Well	100.00%	41.58%	G08	H07
Sample	100.00%	98.42%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	88.42%	46.32%	0	2
%WT_SNP6	100.00%	88.95%	100	29.3200237

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (22 occurrences) were replaced by {NULL}.

Unresolved issues

For column %WT SNP6 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP7

Table 38. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB494.0
Name	SNP7
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB494.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 7.

Data from SNP 7.

Metadata

n/a

Table 39. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%VT SNP7	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 40. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 44.1% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	175 ( 97.8% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	179 ( 100.0% )
Varroa/100 bees	1 - 11	3.4916645200	0	0	0.79169869	4.25531914	34.16149068	179	16 ( 8.9% )	64 ( 35.8% )	0 ( 0.0% )	85 ( 47.5% )
%VT SNP7	1 - 11	14.6519691600	0	0	1.25096672	20.82125072	97.18110572	179	0 ( 0.0% )	78 ( 43.6% )	0 ( 0.0% )	102 ( 57.0% )

Quality measures

Table 41. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.68%	sciensano	plaat 2
Well	100.00%	44.13%	G08	F07
Sample	100.00%	97.77%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	91.06%	47.49%	0	4.081632653
%VT SNP7	100.00%	56.98%	0	1.330577858

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (22 occurrences) were replaced by {NULL}.

Unresolved issues

For column %VT SNP7 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

SNP8

Table 42. Standardised metadata of the dataset. Reported parameter (Parameter); content of the parameter (Content).

Parameter	Content
Unique identifier	BGDGN199.SNPAB495.0
Name	SNP8
Target IRI	https://app.pollinatorhub.eu/dataset-discovery/parts/BGDGN199.SNPAB495.0
Table Type	File
Licence	CC BY-NC-ND 4.0
Description	Data from SNP 8.

Data from SNP 8.

Metadata

n/a

Table 43. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Column Description	Datatype	Descriptor	Unit
Well	Identifier of the well on the plate in which the analysis was performed.	String	Text [0.0.TEXTA315]	n/a
Sample	Identifier of the sample that was analysed.	String	dwc:materialSampleID [0.0.MTRLS489]	n/a
Sample_plate	Combined identifier of sample identifier and plate identifier.	String	sample_plate ID [BGDGN199.0.SMPLP517]	n/a
Varroa/100 bees	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.	Decimal number	pms:varroaInfestationOfAdultBees [0.0.VRRNF468]	mites (100 bees)-1
%WT SNP8	Not specified by the data provider.	Decimal number	DecimalNumber [0.0.DCMLN314]	%
Plaat	Identifier of the plate in which the analysis was performed.	String	plate ID [BGDGN199.0.PLTDA516]	n/a

Metadata of individual tables can be found in Annex 1.

Descriptive measures

Table 44. Content analysis of the table. Column name (Name); range of length of characters (Length); arithmetic mean of values in column (Mean); lowest value in column (Min); first quartile of values in column (Q1); median of values in column (Median); third quartile of values in column (Q3); highest value in column (Max); number of records (Total); number and percentage (between brackets) of all values containing NULL (Missing), the value 0 (Zero), exclusively blank characters (Blank), and of distinct values including NULL, Zero and blank (Distinct).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 46.7% )
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	165 ( 97.6% )
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	169 ( 100.0% )
Varroa/100 bees	1 - 11	3.5326917700	0	0	0.7812508	4.23315602	34.16149068	169	13 ( 7.7% )	61 ( 36.1% )	0 ( 0.0% )	85 ( 50.3% )
%WT SNP8	1 - 11	34.1425068200	0	20.02609275	35.22537038	45.51590307	100	169	0 ( 0.0% )	13 ( 7.7% )	0 ( 0.0% )	151 ( 89.3% )
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )

Quality measures

Table 45. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	46.75%	G08	F07
Sample	100.00%	97.63%	CGMGPPLU	ADPLXSRT
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1
Varroa/100 bees	92.31%	50.30%	0	4.081632653
%WT SNP8	100.00%	89.35%	0	31.44958071
Plaat	100.00%	1.78%	sciensano	plaat 2

Changes made to preparatory file

Column Sample (second occurrence) was renamed to Sample_plate in order to assure that column names within a table are unique.

Changes made to data

Missing values (13 occurrences) were replaced by {NULL}.

Unresolved issues

For column %WT SNP8 it can be guessed, but it has not explicitly been stated by the data provider what the column reports. The data provider is requested to make this information available.

References

De Smet L. 2023 Genotyping data - SMR SNPs - TIER1 TIER2 2021. B-GOOD Bee Health Data Portal. [2024-11-4] beehealthdata.org

Annex 1: Table column reports

Table: All

Column: Varroa/100 bees

Table 46. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 47. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.6469717800	0	0	1	4.31985294	34.16149068	197	26 ( 13.2% )	63 ( 32.0% )	0 ( 0.0% )	88 ( 44.7% )

Table 48. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	86.80%	44.67%	0	4.081632653

Continuous Data Distribution

Figure 1. Distribution of values in the column.

Outliers

Figure 2. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 3. Visualization of completeness of the data in the column.

Uniqueness

Figure 4. Visualization of uniqueness of the data in the column.

Column: %WT SNP1

Table 49. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP1
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 50. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP1	1 - 11	55.1405455900	0	33.86484901	57.05726243	76.63692376	100	197	32 ( 16.2% )	4 ( 2.0% )	0 ( 0.0% )	144 ( 73.1% )

Table 51. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP1	83.76%	73.10%	n/a	60.10321397

Continuous Data Distribution

Figure 5. Distribution of values in the column.

Outliers

Figure 6. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 7. Visualization of completeness of the data in the column.

Uniqueness

Figure 8. Visualization of uniqueness of the data in the column.

Column: %VT SNP2

Table 52. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP2
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 53. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP2	1 - 11	40.0328517000	0	19.49761783	36.84932291	57.51056321	100	197	23 ( 11.7% )	16 ( 8.1% )	0 ( 0.0% )	155 ( 78.7% )

Table 54. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP2	88.32%	78.68%	n/a	98.55977463

Continuous Data Distribution

Figure 9. Distribution of values in the column.

Outliers

Figure 10. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 11. Visualization of completeness of the data in the column.

Uniqueness

Figure 12. Visualization of uniqueness of the data in the column.

Column: %WT SNP3

Table 55. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP3
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 56. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP3	3 - 11	75.7145307200	4.482260858	68.10365258	78.70889394	87.39595038	100	197	36 ( 18.3% )	0 ( 0.0% )	0 ( 0.0% )	156 ( 79.2% )

Table 57. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP3	81.73%	79.19%	n/a	87.04667184

Continuous Data Distribution

Figure 13. Distribution of values in the column.

Outliers

Figure 14. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 15. Visualization of completeness of the data in the column.

Uniqueness

Figure 16. Visualization of uniqueness of the data in the column.

Column: %VT_SNP4

Table 58. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT_SNP4
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 59. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT_SNP4	1 - 11	45.3540254400	0	31.49052492	44.82240363	59.7590263	92.7235043	197	26 ( 13.2% )	2 ( 1.0% )	0 ( 0.0% )	171 ( 86.8% )

Table 60. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT_SNP4	86.80%	86.80%	n/a	35.24010352

Continuous Data Distribution

Figure 17. Distribution of values in the column.

Outliers

Figure 18. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 19. Visualization of completeness of the data in the column.

Uniqueness

Figure 20. Visualization of uniqueness of the data in the column.

Column: %WT_SNP5

Table 61. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP5
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 62. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP5	3 - 11	53.5836237000	1.054369516	30.26777446	49.67057544	76.83676998	100	197	17 ( 8.6% )	0 ( 0.0% )	0 ( 0.0% )	162 ( 82.2% )

Table 63. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP5	91.37%	82.23%	100	31.24611541

Continuous Data Distribution

Figure 21. Distribution of values in the column.

Outliers

Figure 22. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 23. Visualization of completeness of the data in the column.

Uniqueness

Figure 24. Visualization of uniqueness of the data in the column.

Column: %WT_SNP6

Table 64. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP6
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 65. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP6	1 - 11	42.6447732800	0	14.96576802	42.79109136	59.90234804	100	197	8 ( 4.1% )	1 ( 0.5% )	0 ( 0.0% )	169 ( 85.8% )

Table 66. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP6	95.94%	85.79%	100	29.3200237

Continuous Data Distribution

Figure 25. Distribution of values in the column.

Outliers

Figure 26. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 27. Visualization of completeness of the data in the column.

Uniqueness

Figure 28. Visualization of uniqueness of the data in the column.

Column: %VT SNP7

Table 67. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP7
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 68. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP7	1 - 11	14.6519691600	0	0	1.25096672	20.82125072	97.18110572	197	18 ( 9.1% )	78 ( 39.6% )	0 ( 0.0% )	103 ( 52.3% )

Table 69. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP7	90.86%	52.28%	0	1.330577858

Continuous Data Distribution

Figure 29. Distribution of values in the column.

Outliers

Figure 30. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 31. Visualization of completeness of the data in the column.

Uniqueness

Figure 32. Visualization of uniqueness of the data in the column.

Column: %WT SNP8

Table 70. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP8
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 71. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP8	1 - 11	34.1425068200	0	20.02609275	35.22537038	45.51590307	100	197	28 ( 14.2% )	13 ( 6.6% )	0 ( 0.0% )	152 ( 77.2% )

Table 72. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP8	85.79%	77.16%	n/a	31.44958071

Continuous Data Distribution

Figure 33. Distribution of values in the column.

Outliers

Figure 34. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 35. Visualization of completeness of the data in the column.

Uniqueness

Figure 36. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 73. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 74. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	197	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	197 ( 100.0% )

Table 75. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 37. Visualization of completeness of the data in the column.

Uniqueness

Figure 38. Visualization of uniqueness of the data in the column.

Table: Fully genotypes

Column: Varroa/100 bees

Table 76. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 77. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.7052990900	0	0	0.92372881	4.39578005	34.16149068	146	14 ( 9.6% )	49 ( 33.6% )	0 ( 0.0% )	78 ( 53.4% )

Table 78. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	90.41%	53.42%	0	4.081632653

Continuous Data Distribution

Figure 39. Distribution of values in the column.

Outliers

Figure 40. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 41. Visualization of completeness of the data in the column.

Uniqueness

Figure 42. Visualization of uniqueness of the data in the column.

Column: %WT SNP1

Table 79. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP1
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 80. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP1	1 - 11	53.7635266900	0	33.14642802	55.34611873	74.6144463	100	146	0 ( 0.0% )	3 ( 2.1% )	0 ( 0.0% )	128 ( 87.7% )

Table 81. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP1	100.00%	87.67%	100	60.10321397

Continuous Data Distribution

Figure 43. Distribution of values in the column.

Outliers

Figure 44. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 45. Visualization of completeness of the data in the column.

Uniqueness

Figure 46. Visualization of uniqueness of the data in the column.

Column: %VT SNP2

Table 82. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP2
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 83. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP2	1 - 11	40.5817424300	0	20.44552144	38.65079622	57.51056321	100	146	0 ( 0.0% )	10 ( 6.8% )	0 ( 0.0% )	134 ( 91.8% )

Table 84. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP2	100.00%	91.78%	0	29.1413998

Continuous Data Distribution

Figure 47. Distribution of values in the column.

Outliers

Figure 48. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 49. Visualization of completeness of the data in the column.

Uniqueness

Figure 50. Visualization of uniqueness of the data in the column.

Column: %WT SNP3

Table 85. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP3
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 86. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP3	3 - 11	75.334793520	22.85615556	68.0509934	76.2138877	85.89533093	100	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	142 ( 97.3% )

Table 87. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP3	100.00%	97.26%	68.5731271	90.58432945

Continuous Data Distribution

Figure 51. Distribution of values in the column.

Outliers

Figure 52. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 53. Visualization of completeness of the data in the column.

Uniqueness

Figure 54. Visualization of uniqueness of the data in the column.

Column: %VT_SNP4

Table 88. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT_SNP4
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 89. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT_SNP4	9 - 11	45.9558419800	1.275329678	31.52023669	44.71511219	61.26489601	92.7235043	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	146 ( 100.0% )

Table 90. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT_SNP4	100.00%	100.00%	29.56681541	29.56681541

Continuous Data Distribution

Figure 55. Distribution of values in the column.

Outliers

Figure 56. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 57. Visualization of completeness of the data in the column.

Uniqueness

Figure 58. Visualization of uniqueness of the data in the column.

Column: %WT_SNP5

Table 91. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP5
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 92. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP5	3 - 11	52.6448948000	4.823066094	30.34625344	49.67057544	73.83778961	100	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	138 ( 94.5% )

Table 93. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP5	100.00%	94.52%	100	46.2503804

Continuous Data Distribution

Figure 59. Distribution of values in the column.

Outliers

Figure 60. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 61. Visualization of completeness of the data in the column.

Uniqueness

Figure 62. Visualization of uniqueness of the data in the column.

Column: %WT_SNP6

Table 94. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP6
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 95. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP6	1 - 11	46.8747232100	0	24.38664945	46.09592509	62.49655182	100	146	0 ( 0.0% )	1 ( 0.7% )	0 ( 0.0% )	132 ( 90.4% )

Table 96. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP6	100.00%	90.41%	100	57.51618532

Continuous Data Distribution

Figure 63. Distribution of values in the column.

Outliers

Figure 64. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 65. Visualization of completeness of the data in the column.

Uniqueness

Figure 66. Visualization of uniqueness of the data in the column.

Column: %VT SNP7

Table 97. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP7
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 98. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP7	1 - 11	14.3369226900	0	0	1.29550921	21.51670169	79.38879443	146	0 ( 0.0% )	64 ( 43.8% )	0 ( 0.0% )	83 ( 56.8% )

Table 99. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP7	100.00%	56.85%	0	64.806147

Continuous Data Distribution

Figure 67. Distribution of values in the column.

Outliers

Figure 68. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 69. Visualization of completeness of the data in the column.

Uniqueness

Figure 70. Visualization of uniqueness of the data in the column.

Column: %WT SNP8

Table 100. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP8
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 101. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP8	1 - 11	36.7592623000	0	23.65645713	38.65343565	47.75480739	100	146	0 ( 0.0% )	9 ( 6.2% )	0 ( 0.0% )	132 ( 90.4% )

Table 102. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP8	100.00%	90.41%	0	26.25212058

Continuous Data Distribution

Figure 71. Distribution of values in the column.

Outliers

Figure 72. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 73. Visualization of completeness of the data in the column.

Uniqueness

Figure 74. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 103. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 104. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 25	n/a	AHBNGNKL_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	146	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	146 ( 100.0% )

Table 105. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	AHBNGNKL_plaat 1	AHBNGNKL_plaat 1

Completeness

Figure 75. Visualization of completeness of the data in the column.

Uniqueness

Figure 76. Visualization of uniqueness of the data in the column.

Table: SNP1

Column: Plaat

Table 106. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 107. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )

Table 108. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.82%	sciensano	plaat 2

Data Distribution Top 20

Figure 77. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 78. Visualization of completeness of the data in the column.

Uniqueness

Figure 79. Visualization of uniqueness of the data in the column.

Column: Well

Table 109. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 110. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H11	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	86 ( 52.1% )

Table 111. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	52.12%	A06	F04

Completeness

Figure 80. Visualization of completeness of the data in the column.

Uniqueness

Figure 81. Visualization of uniqueness of the data in the column.

Column: Sample

Table 112. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 113. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 17	n/a	AHBNGNKL	n/a	n/a	n/a	ZZUPHAAK	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 97.6% )

Table 114. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.58%	CGMGPPLU	AHBNGNKL

Completeness

Figure 82. Visualization of completeness of the data in the column.

Uniqueness

Figure 83. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 115. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 116. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 25	n/a	AHBNGNKL_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	165	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	165 ( 100.0% )

Table 117. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	AHBNGNKL_plaat 1	AHBNGNKL_plaat 1

Completeness

Figure 84. Visualization of completeness of the data in the column.

Uniqueness

Figure 85. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 118. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 119. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	5.9743101400	0	0.125	2.5	6.59340659	46.90265487	165	45 ( 27.3% )	30 ( 18.2% )	0 ( 0.0% )	52 ( 31.5% )

Table 120. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	72.73%	31.52%	n/a	4.411764706

Continuous Data Distribution

Figure 86. Distribution of values in the column.

Outliers

Figure 87. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 88. Visualization of completeness of the data in the column.

Uniqueness

Figure 89. Visualization of uniqueness of the data in the column.

Column: %WT SNP1

Table 121. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP1
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 122. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP1	1 - 11	55.1405455900	0	33.86484901	57.05726243	76.63692376	100	165	0 ( 0.0% )	4 ( 2.4% )	0 ( 0.0% )	143 ( 86.7% )

Table 123. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP1	100.00%	86.67%	100	60.10321397

Continuous Data Distribution

Figure 90. Distribution of values in the column.

Outliers

Figure 91. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 92. Visualization of completeness of the data in the column.

Uniqueness

Figure 93. Visualization of uniqueness of the data in the column.

Table: SNP2

Column: Plaat

Table 124. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 125. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )

Table 126. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.72%	sciensano	plaat 2

Data Distribution Top 20

Figure 94. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 95. Visualization of completeness of the data in the column.

Uniqueness

Figure 96. Visualization of uniqueness of the data in the column.

Column: Well

Table 127. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 128. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 45.4% )

Table 129. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	45.40%	G08	F07

Completeness

Figure 97. Visualization of completeness of the data in the column.

Uniqueness

Figure 98. Visualization of uniqueness of the data in the column.

Column: Sample

Table 130. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 131. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	170 ( 97.7% )

Table 132. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.70%	CGMGPPLU	ADPLXSRT

Completeness

Figure 99. Visualization of completeness of the data in the column.

Uniqueness

Figure 100. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 133. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 134. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	174	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	174 ( 100.0% )

Table 135. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 101. Visualization of completeness of the data in the column.

Uniqueness

Figure 102. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 136. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 137. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.4145723300	0	0	0.74261011	4.02040816	34.16149068	174	16 ( 9.2% )	64 ( 36.8% )	0 ( 0.0% )	83 ( 47.7% )

Table 138. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	90.80%	47.70%	0	4.081632653

Continuous Data Distribution

Figure 103. Distribution of values in the column.

Outliers

Figure 104. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 105. Visualization of completeness of the data in the column.

Uniqueness

Figure 106. Visualization of uniqueness of the data in the column.

Column: %VT SNP2

Table 139. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP2
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 140. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP2	1 - 11	40.0328517000	0	19.49761783	36.84932291	57.51056321	100	174	0 ( 0.0% )	16 ( 9.2% )	0 ( 0.0% )	154 ( 88.5% )

Table 141. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP2	100.00%	88.51%	0	98.55977463

Continuous Data Distribution

Figure 107. Distribution of values in the column.

Outliers

Figure 108. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 109. Visualization of completeness of the data in the column.

Uniqueness

Figure 110. Visualization of uniqueness of the data in the column.

Table: SNP3

Column: Plaat

Table 142. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 143. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.9% )

Table 144. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.86%	sciensano	plaat 2

Data Distribution Top 20

Figure 111. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 112. Visualization of completeness of the data in the column.

Uniqueness

Figure 113. Visualization of uniqueness of the data in the column.

Column: Well

Table 145. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 146. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A02	n/a	n/a	n/a	H10	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	77 ( 47.8% )

Table 147. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	47.83%	G08	F07

Completeness

Figure 114. Visualization of completeness of the data in the column.

Uniqueness

Figure 115. Visualization of uniqueness of the data in the column.

Column: Sample

Table 148. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 149. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	157 ( 97.5% )

Table 150. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.52%	CGMGPPLU	ADPLXSRT

Completeness

Figure 116. Visualization of completeness of the data in the column.

Uniqueness

Figure 117. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 151. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 152. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 100.0% )

Table 153. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 118. Visualization of completeness of the data in the column.

Uniqueness

Figure 119. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 154. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 155. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.6945195800	0	0	0.7812508	4.32684622	34.16149068	161	15 ( 9.3% )	57 ( 35.4% )	0 ( 0.0% )	80 ( 49.7% )

Table 156. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	90.68%	49.69%	0	4.081632653

Continuous Data Distribution

Figure 120. Distribution of values in the column.

Outliers

Figure 121. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 122. Visualization of completeness of the data in the column.

Uniqueness

Figure 123. Visualization of uniqueness of the data in the column.

Column: %WT SNP3

Table 157. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP3
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 158. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP3	3 - 11	75.7145307200	4.482260858	68.10365258	78.70889394	87.39595038	100	161	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	155 ( 96.3% )

Table 159. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP3	100.00%	96.27%	100	87.04667184

Continuous Data Distribution

Figure 124. Distribution of values in the column.

Outliers

Figure 125. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 126. Visualization of completeness of the data in the column.

Uniqueness

Figure 127. Visualization of uniqueness of the data in the column.

Table: SNP4

Column: Plaat

Table 160. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 161. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )

Table 162. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.75%	sciensano	plaat 2

Data Distribution Top 20

Figure 128. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 129. Visualization of completeness of the data in the column.

Uniqueness

Figure 130. Visualization of uniqueness of the data in the column.

Column: Well

Table 163. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 164. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 46.2% )

Table 165. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	46.20%	G08	F07

Completeness

Figure 131. Visualization of completeness of the data in the column.

Uniqueness

Figure 132. Visualization of uniqueness of the data in the column.

Column: Sample

Table 166. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 167. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	168 ( 98.2% )

Table 168. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	98.25%	CGMGPPLU	ADPLXSRT

Completeness

Figure 133. Visualization of completeness of the data in the column.

Uniqueness

Figure 134. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 169. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 170. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	171	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	171 ( 100.0% )

Table 171. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 135. Visualization of completeness of the data in the column.

Uniqueness

Figure 136. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 172. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 173. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.4262976200	0	0	0.72628311	4.06122448	34.16149068	171	15 ( 8.8% )	64 ( 37.4% )	0 ( 0.0% )	83 ( 48.5% )

Table 174. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	91.23%	48.54%	0	4.081632653

Continuous Data Distribution

Figure 137. Distribution of values in the column.

Outliers

Figure 138. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 139. Visualization of completeness of the data in the column.

Uniqueness

Figure 140. Visualization of uniqueness of the data in the column.

Column: %VT_SNP4

Table 175. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT_SNP4
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 176. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT_SNP4	1 - 11	45.3540254400	0	31.49052492	44.82240363	59.7590263	92.7235043	171	0 ( 0.0% )	2 ( 1.2% )	0 ( 0.0% )	170 ( 99.4% )

Table 177. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT_SNP4	100.00%	99.42%	0	35.24010352

Continuous Data Distribution

Figure 141. Distribution of values in the column.

Outliers

Figure 142. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 143. Visualization of completeness of the data in the column.

Uniqueness

Figure 144. Visualization of uniqueness of the data in the column.

Table: SNP5

Column: Well

Table 178. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 179. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 43.9% )

Table 180. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	43.89%	G08	F07

Completeness

Figure 145. Visualization of completeness of the data in the column.

Uniqueness

Figure 146. Visualization of uniqueness of the data in the column.

Column: Sample

Table 181. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 182. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	176 ( 97.8% )

Table 183. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.78%	CGMGPPLU	ADPLXSRT

Completeness

Figure 147. Visualization of completeness of the data in the column.

Uniqueness

Figure 148. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 184. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 185. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	180 ( 100.0% )

Table 186. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 149. Visualization of completeness of the data in the column.

Uniqueness

Figure 150. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 187. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 188. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.4267982600	0	0	0.74261011	4.10289115	34.16149068	180	18 ( 10.0% )	65 ( 36.1% )	0 ( 0.0% )	85 ( 47.2% )

Table 189. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	90.00%	47.22%	0	4.081632653

Continuous Data Distribution

Figure 151. Distribution of values in the column.

Outliers

Figure 152. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 153. Visualization of completeness of the data in the column.

Uniqueness

Figure 154. Visualization of uniqueness of the data in the column.

Column: %WT_SNP5

Table 190. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP5
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 191. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP5	3 - 11	53.5836237000	1.054369516	30.26777446	49.67057544	76.83676998	100	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	161 ( 89.4% )

Table 192. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP5	100.00%	89.44%	100	31.24611541

Continuous Data Distribution

Figure 155. Distribution of values in the column.

Outliers

Figure 156. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 157. Visualization of completeness of the data in the column.

Uniqueness

Figure 158. Visualization of uniqueness of the data in the column.

Column: Plaat

Table 193. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 194. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	180	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )

Table 195. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.67%	sciensano	plaat 2

Data Distribution Top 20

Figure 159. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 160. Visualization of completeness of the data in the column.

Uniqueness

Figure 161. Visualization of uniqueness of the data in the column.

Table: SNP6

Column: Plaat

Table 196. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 197. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.6% )

Table 198. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.58%	sciensano	plaat 2

Data Distribution Top 20

Figure 162. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 163. Visualization of completeness of the data in the column.

Uniqueness

Figure 164. Visualization of uniqueness of the data in the column.

Column: Well

Table 199. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 200. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 41.6% )

Table 201. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	41.58%	G08	H07

Completeness

Figure 165. Visualization of completeness of the data in the column.

Uniqueness

Figure 166. Visualization of uniqueness of the data in the column.

Column: Sample

Table 202. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 203. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	3 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	187 ( 98.4% )

Table 204. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	98.42%	CGMGPPLU	ADPLXSRT

Completeness

Figure 167. Visualization of completeness of the data in the column.

Uniqueness

Figure 168. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 205. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 206. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	11 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	190	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	190 ( 100.0% )

Table 207. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 169. Visualization of completeness of the data in the column.

Uniqueness

Figure 170. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 208. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 209. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.4551826400	0	0	0.7812508	4.23315602	34.16149068	190	22 ( 11.6% )	65 ( 34.2% )	0 ( 0.0% )	88 ( 46.3% )

Table 210. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	88.42%	46.32%	0	2

Continuous Data Distribution

Figure 171. Distribution of values in the column.

Outliers

Figure 172. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 173. Visualization of completeness of the data in the column.

Uniqueness

Figure 174. Visualization of uniqueness of the data in the column.

Column: %WT_SNP6

Table 211. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT_SNP6
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 212. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT_SNP6	1 - 11	42.4315565200	0	14.28250012	42.64903742	59.84230762	100	190	0 ( 0.0% )	1 ( 0.5% )	0 ( 0.0% )	169 ( 88.9% )

Table 213. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT_SNP6	100.00%	88.95%	100	29.3200237

Continuous Data Distribution

Figure 175. Distribution of values in the column.

Outliers

Figure 176. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 177. Visualization of completeness of the data in the column.

Uniqueness

Figure 178. Visualization of uniqueness of the data in the column.

Table: SNP7

Column: Plaat

Table 214. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 215. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.7% )

Table 216. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.68%	sciensano	plaat 2

Data Distribution Top 20

Figure 179. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 180. Visualization of completeness of the data in the column.

Uniqueness

Figure 181. Visualization of uniqueness of the data in the column.

Column: Well

Table 217. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 218. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 44.1% )

Table 219. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	44.13%	G08	F07

Completeness

Figure 182. Visualization of completeness of the data in the column.

Uniqueness

Figure 183. Visualization of uniqueness of the data in the column.

Column: Sample

Table 220. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 221. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	175 ( 97.8% )

Table 222. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.77%	CGMGPPLU	ADPLXSRT

Completeness

Figure 184. Visualization of completeness of the data in the column.

Uniqueness

Figure 185. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 223. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 224. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	179	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	179 ( 100.0% )

Table 225. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 186. Visualization of completeness of the data in the column.

Uniqueness

Figure 187. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 226. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 227. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.4916645200	0	0	0.79169869	4.25531914	34.16149068	179	16 ( 8.9% )	64 ( 35.8% )	0 ( 0.0% )	85 ( 47.5% )

Table 228. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	91.06%	47.49%	0	4.081632653

Continuous Data Distribution

Figure 188. Distribution of values in the column.

Outliers

Figure 189. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 190. Visualization of completeness of the data in the column.

Uniqueness

Figure 191. Visualization of uniqueness of the data in the column.

Column: %VT SNP7

Table 229. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%VT SNP7
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 230. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%VT SNP7	1 - 11	14.6519691600	0	0	1.25096672	20.82125072	97.18110572	179	0 ( 0.0% )	78 ( 43.6% )	0 ( 0.0% )	102 ( 57.0% )

Table 231. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%VT SNP7	100.00%	56.98%	0	1.330577858

Continuous Data Distribution

Figure 192. Distribution of values in the column.

Outliers

Figure 193. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 194. Visualization of completeness of the data in the column.

Uniqueness

Figure 195. Visualization of uniqueness of the data in the column.

Table: SNP8

Column: Well

Table 232. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Well
Description	Identifier of the well on the plate in which the analysis was performed.
Data type	String
Descriptor	Text [UID:0.0.TEXTA315]
Descriptor description	In computer programming, a string is traditionally a sequence of characters, either as a literal constant or as some kind of variable. The latter may allow its elements to be mutated and the length changed, or it may be fixed (after creation). A string is generally considered as a data type and is often implemented as an array data structure of bytes (or words) that stores a sequence of elements, typically characters, using some character encoding. String may also denote more general arrays or other sequence (or list) data types and structures.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.TEXTA315
Unit	n/a

Table 233. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Well	3 - 3	n/a	A01	n/a	n/a	n/a	H10	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	79 ( 46.7% )

Table 234. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Well	100.00%	46.75%	G08	F07

Completeness

Figure 196. Visualization of completeness of the data in the column.

Uniqueness

Figure 197. Visualization of uniqueness of the data in the column.

Column: Sample

Table 235. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample
Description	Identifier of the sample that was analysed.
Data type	String
Descriptor	dwc:materialSampleID [UID:0.0.MTRLS489]
Descriptor description	An identifier for a material sample.
Descriptor target IRI	http://rs.tdwg.org/dwc/terms/materialSampleID
Unit	n/a

Table 236. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample	8 - 22	n/a	ADPLXSRT	n/a	n/a	n/a	ZZUPHAAK	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	165 ( 97.6% )

Table 237. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample	100.00%	97.63%	CGMGPPLU	ADPLXSRT

Completeness

Figure 198. Visualization of completeness of the data in the column.

Uniqueness

Figure 199. Visualization of uniqueness of the data in the column.

Column: Sample_plate

Table 238. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Sample_plate
Description	Combined identifier of sample identifier and plate identifier.
Data type	String
Descriptor	sample_plate ID [UID:BGDGN199.0.SMPLP517]
Descriptor description	Combined identifier of sample identifier and plate identifier.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.SMPLP517
Unit	n/a

Table 239. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Sample_plate	16 - 30	n/a	ADPLXSRT_pla…	n/a	n/a	n/a	ZZUPHAAK_pla…	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	169 ( 100.0% )

Table 240. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Sample_plate	100.00%	100.00%	ADPLXSRT_plaat 1	ADPLXSRT_plaat 1

Completeness

Figure 200. Visualization of completeness of the data in the column.

Uniqueness

Figure 201. Visualization of uniqueness of the data in the column.

Column: Varroa/100 bees

Table 241. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Varroa/100 bees
Description	Not specified by the data provider. Presumably the Varroa infestation rate in the honey bee sample.
Data type	Decimal number
Descriptor	pms:varroaInfestationOfAdultBees [UID:0.0.VRRNF468]
Descriptor description	The quantity infestation rate of adult honey bee colonies with Varroa mites (Varroa destructor), measured by dislodging Varroa mites from adult honey bees, expressed in number of Varroa mites per unit of honey bees.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.VRRNF468
Unit	mites (100 bees)-1

Table 242. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Varroa/100 bees	1 - 11	3.5326917700	0	0	0.7812508	4.23315602	34.16149068	169	13 ( 7.7% )	61 ( 36.1% )	0 ( 0.0% )	85 ( 50.3% )

Table 243. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Varroa/100 bees	92.31%	50.30%	0	4.081632653

Continuous Data Distribution

Figure 202. Distribution of values in the column.

Outliers

Figure 203. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 204. Visualization of completeness of the data in the column.

Uniqueness

Figure 205. Visualization of uniqueness of the data in the column.

Column: %WT SNP8

Table 244. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	%WT SNP8
Description	Not specified by the data provider.
Data type	Decimal number
Descriptor	DecimalNumber [UID:0.0.DCMLN314]
Descriptor description	Any of the rational or irrational numbers.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/0.0.DCMLN314
Unit	%

Table 245. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
%WT SNP8	1 - 11	34.1425068200	0	20.02609275	35.22537038	45.51590307	100	169	0 ( 0.0% )	13 ( 7.7% )	0 ( 0.0% )	151 ( 89.3% )

Table 246. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
%WT SNP8	100.00%	89.35%	0	31.44958071

Continuous Data Distribution

Figure 206. Distribution of values in the column.

Outliers

Figure 207. Visualization of median, min, max, and outliers in the column.

Completeness

Figure 208. Visualization of completeness of the data in the column.

Uniqueness

Figure 209. Visualization of uniqueness of the data in the column.

Column: Plaat

Table 247. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Parameter	Content
Column name	Plaat
Description	Identifier of the plate in which the analysis was performed.
Data type	String
Descriptor	plate ID [UID:BGDGN199.0.PLTDA516]
Descriptor description	Identifier of the plate in which the analysis was performed.
Descriptor target IRI	https://app.pollinatorhub.eu/vocabulary/descriptors/BGDGN199.0.PLTDA516
Unit	n/a

Table 248. Structural analysis of the table. Column name (Name); concise description of the column (Description); data type in which values are stored (Data type); EUPH-Descriptor (Descriptor); unit in which the values are provided (Unit).

Column Name	Range	Mean	Minimum	Q₁	Median	Q₃	Maximum	Total	Missing	Zero	Blank	Distinct
Plaat	7 - 9	n/a	plaat 1	n/a	n/a	n/a	sciensano	169	0 ( 0.0% )	0 ( 0.0% )	0 ( 0.0% )	3 ( 1.8% )

Table 249. Quality analysis of the table. Column name (Name); completeness of the column (Completeness); uniqueness of the column (Uniqueness); most common value in the column (Most Common Value); least common value in the column (Least Common Value).

Column Name	Completeness	Uniqueness	Most Common Value	Least Common Value
Plaat	100.00%	1.78%	sciensano	plaat 2

Data Distribution Top 20

Figure 210. Distribution of 20 most common values, from highest to lowest.

Completeness

Figure 211. Visualization of completeness of the data in the column.

Uniqueness

Figure 212. Visualization of uniqueness of the data in the column.